Software Update Information

NEW FUNCTIONS

• Dimmer and Relay
  • The dimmer, and the relay now offer even more options for controlling the Smart Home system:
    • You can trigger any automation at the press of a button. For example, press the button for a long time to switch off all the lights when you leave the house.
    • Decoupling of the button press from the electrical circuit:
    • You can manage the outputs in the device settings and decide whether the in-wall device should switch the power supply to the connected consumers when a button is pressed. This allows you, for example, to continue to supply smart lamps with power, but switch them off wirelessly.

IMPROVEMENTS

• iOS
  • If a connection error occurs, the help section indicates that permission for the local network connection is required and explains where to find this setting in the iOS menu.
  • The integration of a new library has improved the integration of Bosch Smart Home cameras.

• New Firmware
  • Dimmer
    • Key press events, configuration option for separating input and output

  • Relay
    • Keypress events, configuration option for separating input and output

  • Universal Switch II
    • The new firmware contains minor improvements and security updates.

Bug Fixes

• Smart Home Controller / Smart Home Controller II
  • If a data backup was triggered on a Smart Home Controller and a data transfer to a Smart Home Controller II was performed later, the device settings from the data backup were applied to the devices. These settings could have been outdated if they were changed between the data backup and the data transfer. This issue has been resolved.

• Smart Home Cloud – Text Adjustment
  • Mirroring data to the Bosch Smart Home Cloud has not required remote access for some time. This was incorrectly described in several places in the text (notifications, push notifications, various dialog windows).

• Home Connect Devices – Automations
  • Home Connect devices could not perform actions in automations. This issue has been resolved.

• Relay
  • It is no longer possible to configure “Automatic Switch-Off” if the device is in “Electric Heating” or “Boiler” configuration mode. This was incorrectly possible for a short time.
  • In rare cases, with the Relay (Configuration: Electric Heating), the schedule was not implemented correctly during automatic control. This issue has been resolved.
  • In rare cases, when a Relay was reinstalled, its tile was displayed twice in the favorites view. This issue has been resolved.

• Radiator Thermostat II
  • The device could falsely display an E03 error. This issue has been resolved.
  • In rare cases, the schedule was not carried out correctly for individual radiator thermostats. This issue has been resolved.
  • In rare cases, the firmware update started automatically. This issue has been resolved.

• Smart Plug Compact
  • After a restart of the Smart Home Controller, the schedule was sometimes not loaded. This issue has been resolved.

• Eyes Indoor Camera II
  • In rare cases, the device was displayed as "not reachable". Scenarios and automations were still executed correctly. The display error has been resolved.

• Android App
  • The teaser for the Smart Tips was still displayed, even though the Smart Tips were deactivated. This has been resolved.
  • In rare cases, the Smart Tips were displayed when the app restarted, even if they were previously closed. This has been resolved.
  • In the room view, the device tiles jumped to the top of the screen while scrolling when data was being loaded from the Smart Home Controller. This has been resolved.

• iOS App
  • If a Room Thermostat II 230V was not found during setup, no error message appeared. This has been resolved.
  • [+M] devices: Optimized instructions in case Bluetooth is deactivated.

• Common crash causes, other minor bug fixes, and text errors have been resolved.

ADDITIONAL INFORMATION

• General
  • Updates of various open-source libraries.
  • New functions, as well as certain improvements and bug fixes, are only available after installation of the Controller and the app update. Please note that the app update will be released later and in phases.
  • For some new functions, the device's firmware must be updated first.

VERSIONS AND AVAILABILITY

Smart Home Controller

The following versions for the Smart Home Controller are being released:

• 10.25.4333-2407

Notes on Availability:

• The update for the Smart Home Controller will be released from 03.02.2025.
• The update for the Smart Home Controller is expected to be available to all customers from 04.02.2025.

Smart Home Android App

The following version of the Smart Home Android app is being distributed:

• 10.25.3815

Notes on availability:

• The update for the Smart Home Android app is expected to be distributed from 10.02.2025 .
• The update for the Smart Home Android app is expected to be available to all customers from 17.02.2025 available to all customers.

Smart Home iOS App

The following version of the Smart Home iOS app is being distributed:

• 10.25.0 (9456)

Notes on availability:

• The update for the Smart Home iOS app is expected to be distributed from 10.02.2025 as an automatic app update.
• The update for the Smart Home iOS app is expected to be available to all customers from 10.02.2025 as a manual update.
• The update for the Smart Home iOS app will be available to all customers from 17.02.2025 as an automatic app update.