Your smart thermostats are linked to your entire Smart Home system. They can therefore be integrated effortlessly into individual scenarios or automations:

• In scenarios, you can control several devices at the same time with a single command. For example, your “Leaving home” scenario turns down all your radiator thermostats automatically, turns out the lights and switches off the power to devices connected to smart plugs.

• With automations, you can connect your smart radiator thermostats to other devices to control these according to the if-then principle.You can use temperature measurements to automatically lower your smart shutters from a certain temperature to keep out the heat – or to switch on fans connected via smart plugs for cooling. Conversely, smart devices can also activate your thermostats. The heating in your office could then be turned on automatically when you switch on the light to start work.

The preconfigured “Sustainable ventilation” service turns down your Smart Home thermostats as soon as your door/window contact detects an open window in the room. You will find it under “Services” in the “Climate manager”.

Naturally, you can adapt the service to meet your individual requirements:

• Select door/window contacts which will act as a trigger for regulating the thermostats.

• Select a reaction time (0-180 seconds) after which the radiator thermostats will be turned down. This time delay allows you to let your cat out for example without your smart thermostats being turned down immediately.

A “heating break” is practical in summer and if you are away for long periods.

In this mode, your smart radiator thermostat is automatically turned down to the lowest setting and the room control which is part of automations and scenarios is ignored for the duration of the heating break. Consequently, there is no need to change all your automations and scenarios in summer.

To prevent limescale in the radiator valves building up over time, they are opened regularly even during the heating break.

Your radiator valves are thus maintained all year round without having the heating on unnecessarily.

You will find the heating break option in your Bosch Smart Home app under “Services” > “Climate manager”“ > “Heating break & cooling”.

Manual control on the device itself is intuitive and simple:

• Set desired temperature: Press the control knob on your smart thermostat briefly (1 second). The menu (“SET”) will open. You can now increase or decrease the temperature in 0.5 degree increments by turning the knob towards + or -.

• End heating break: Maybe a “heating break” is activated for your smart radiator thermostat but you would now like to heat the room. To do this, press the control knob for 1 second. You can now set your desired temperature in the usual way.

• Activate/deactivate child lock: To activate or deactivate the child lock, press the control knob for 3 seconds until “LCK” appears. By turning the knob towards + or -, you can easily activate or deactivate the child lock.